Warnings:

1)CRM/F CX code pins and guides must be used for pneumatic contacts modules. These pins also provide coding if pneumatic contacts modules are used exclusively.

Use of units for pneumatic contacts

- pneumatic contacts for pressure values up to 10 bar, for use with clean and dry compressed air
- possibility of using tubes with different diameters in the same modular unit
- female contacts with or without closing valve
- working temperature range - 40 °C ÷ + 80 °C
- use of tubes with Ø 8.0 and/or 10 mm, and possible replacement of tubes with assembled units. Tube with

• ID inner Ø (push-over attachment of tubes over barbed straight contacts):
CX xx MPF/M, CX xx MPV

• OD outer Ø (push-in attachment of tubes to the quick-fitting contacts):
CX xx MPQF/M, CX xx MPAV, CX xx MPAF/M, CX xx MPQV

---

Dimensions shown in mm are not binding and may be changed without notice.

---