Due to the reduced electrical engagement length of the HDMI standard, the modules have to be installed in enclosure combinations that allow the coupling of the two MIXO frames within 20,5 mm between the fixing points. The following enclosures are recommended:
- V-TYPE housings coupled with metal hoods
- JEI®-V housings coupled with metal hoods
- T-TYPE enclosures with PE jumpers
- MIXO ONE enclosures
- COB panel supports

With the CX 01 MIM male module, it is mandatory to use the CW ... MIAM patch cord, supplied with a specific cable clamp, tailored to fit the outline of the HDMI connector.
With the CX 01 MIF female module, it is mandatory to use the CW ... MIAF patch cord, twin of the CW ... MIAM but without the cable clamp.

For high quality video signal transmission, with HDMI Type A connectors (19-pole + shield).
Supports HDMI 1.4 and 2.0 standards (HDMI = High Definition Multimedia Interface), full Ultra HD 4k@60 Hz, 4096 x 2160p resolution.
Supports Ethernet up to and including 18 Gb/s.
Supports ARC (Audio Return Channel).

---

---